News

It can be difficult to handle chemicals on a daily basis, especially when the chemicals are hazardous and hence toxic. If they are not handled properly and spills occur, then it may cause injuries to workers and even environmental damage. This is one of the main reasons why it is essential to have a chemical spill kit at your industrial site.

If you are planning to buy a spill kit then you need to know that they are available in different sizes. Generally, the size of the kit is in gallons and there is a type of absorbent material included along with other types of safety equipment.

What you will find in chemical spill kits?

When you buy a chemical spill kit, you need to make sure that you buy one which will be able to handle the amount of chemical at your site. You can also find breathing masks in these kits which can protect you when you are cleaning the chemical spill. In addition to this, you will also find eye-protection and gloves which you can use to protect your eyes and hands.

Chemical spill kits come with a lid removal tool which opens the lid easily when you need to use it. The lid also has a rubber gasket seal which helps to keep the moisture out. Spill kits can be moved from location to location easily which means that you can place them anywhere on site.

Best management practices state, businesses that pose hazards to the environment should undertake safety measures to avoid these risks from causing environmental harm. To comply with these regulations, industrial companies usually use spill containment pallets to make sure that harmful materials do not damage the environment.

Oil absorbents are one of the most common components in spill kits. Spill clean up rolls and pads are oil absorbents that are capable of soaking hydrocarbons such as fuel oil, lubricant oil, gasoline and oil.

The oil absorbents used for oil spills are specially manufactured for unknown liquid spills and chemical spills. Universal maintenance absorbent pads are manufactured from meltblown polypropylene sorbent and lint-free spun bond fabric that is ultrasonically bonded with each other. It comes in a grey colour which enables in to mask the dirt. After wringing out the absorbent liquid, these pads can even be reused. These types of oil absorbents can also be used for everyday maintenance activities such as small spills and repairs.

Economy oil absorbent pads and rolls are other oil absorbents that are capable of soaking up oil and oil-based fluids. They are generally made from one layer of hydrophobic oil only polypropylene along with stacked weave designed for increasing the surface area and make it effective in soaking small oil spills. These rolls and pads are bright white in colour, thus making it easy to see whether they are completely saturated with oil.

If an oil spillage occurs in your industrial setting then you need to make sure that you clean it up as soon as possible. To do this you need a spill kit which has oil absorbents such as socks, pillows and pads. These absorbents can easily soak up the oil quickly. If you are planning to buy a spill kit then you need to know that there are several types of kits available.

Here are some of tips which will help you to select a spill kit:

First of all, you need to know what type of liquid usually spills at your working site. If the substance contains hydrocarbons such as jet fuel, gasoline or motor oil then you need to go for general oil absorbents. Some of the absorbents are specifically designed in such a way they only absorb oil, a specific chemical or another type of fluid.

If you have a look online you will find that there are three types of spill kits.

• The first one is known as a universal kit which helps to absorb all kinds of liquids. This type of kit can absorb oil and water.

• An only oil spill kit is another type which means that it only absorbs oil and hence repels water.

• The Hazmat spill kit is the third type which can absorb water based liquids, strong acidic solvents and also hydrocarbons.

You also need to know that these kits also come with safety accessories such as gloves which can help to protect your hands and goggles to protect your eyes.

Oil absorbents and spill containment devices are first aid methods for oil spills. Spill containments devices and oil absorbents are valuable safety tools that help solve your fuel or chemical spill easily and quickly.

Oil has unusual properties which can be very difficult to remove from materials and fabrics. There are industries where workers are exposed to the presence of oil on a daily basis. It is in these surroundings that it is important to keep oil spillages to a minimum.

By keeping surplus oil to a minimum, businesses can reduce expenses on oil and also stop damage to the environment caused by spills. However, it is extremely difficult to complete this task without using the right type of oil absorbents.

One type of spillage that is difficult to clean is in a situation when water and oil are spilt at the same time. Usually, when water and oil meet, they do not mix and the resultant spill sees oil floating on top of the water thus creating an oil layer. If there is just a water spillage the dangers can be comparatively less, but when oil comes into contact with water, it will rapidly spread across the water surface.

So, in order to minimise the risks of disruption to the workplace it is essential for workplaces places to have the appropriate spill containment and oil absorbent kit ready at their disposal.

Oil spills are a common problem for many industries that deal with fluids, oils and chemicals. Listed below are a few things that you should keep in mind when choosing spill kits.

• You should make an assessment of the kind of liquid you are likely to be cleaning up. Find out if the liquids you use are hydrocarbon based or water based. Hydrocarbon only based spill kits contain absorbents that repel water and absorb the hydrocarbon based substance.

• Find out if you are dealing with hazardous substances. If you have a number of different substances, you should determine the worst case scenario. For instance if you have two non hazardous substances that could combine to make a hazardous one, you need to make sure that you’re aware of it.

• Plan the size of your spill kits and keep in mind largest possible spillage that could occur. If you are prone to particularly large leaks, consider using a large spill kit. These contain equipment such as coveralls, covered boots, goggles and duct tape.

• Determine if the spill is likely to occur in or out of water.

Spill kits are an absolute essential if you regularly deal with potentially harmful spillages in your workplace.

All businesses and manufacturers who deal with chemicals and other liquids face the problem of accidental spills. These spills can be dangerous, and can not only be harmful to workers but also to the environment. This is why you need make sure that any spills are cleaned up as soon as possible.

Toxic chemicals can cause serious health issues and can also be fatal, so you need to clean up spills immediately and using an appropriate spill kit.

Many different types of businesses including transport companies, laboratories and manufacturers use chemicals or other fluids that can be extremely dangerous. High risk industries such as these should make having the appropriate spill kits a priority.

Chemical spill kits – Chemical spill kits are designed so that they can clean up all types of chemicals easily. These kits are available in various sizes and types and their capability is measured in the form of gallons. In addition to this, you can also get other absorbents such as pillows, socks and pads.

To offer maximum protection, spill kits also have safety equipment, which includes goggles and gloves.

Below is a little useful information about spill kits which you should know before making a purchase.

What are spill kits?

Spill kits are a collection of items that can be used in case of a spill or leak. They are particularly useful on industrial sites, where spillages are a regular occurrence.

The contents of spill kits

Spill kits contain 2 or 3 types of equipment. The first type of equipment is called personal protective equipment. The second kind of equipment is used to clean up the spill. Some kits even contain equipment to stop leakages.

The importance of personal protective equipment

Different spill kits have different types of personal protective equipment. Below are a few different types of spill kits and their contents.

1. Small spill kits: Small spill kits generally contain gloves, absorbents and a clean up container.

2. Large spill kits: Large spill kits contain protective clothing for two people. The items of clothing in large spill kits could include suits, gloves, boot covers, safety glasses and somtimes duct tape.

Spill kits are vital for any environment where spillages are a regular occurrence, especially where hazardous chemicals are involved.

If you work with hazardous chemicals and liquids, you need to make sure that you are fully prepared for inevitable spills. Chemicals in your workplace are sure to be spilled at some point, so it’s essential that you have spill kits for emergency situations.

When buying spill kits, you need to make sure that you get one which will clear up the spillage properly. In addition to this, you also need to consider the type of liquids which are used in your company, as not all types of absorbents can be used for all types of liquids.

What are the different types of spill kits

Universal kits are commonly used, as they can absorb a wide range of liquids. On the other hand, only oil kits help to absorb any oil-related substances. Hazmat kits are perfect for absorbing dangerous or hazardous liquids. You will also find special spill kits which help to clear up materials such as mercury and battery acid.

You need to consider the actual size of spills which could potentially occur. For smaller spills, you can opt for bagged or bucket kits, and for larger spills go for wheeled cart kits or drum spilled kits.

If you need to deal with dangerous materials then make sure that your spill kits include safety gears such as goggles, gloves and masks.

If you have a business and you deal with chemicals, oil or any other type of fluid, then make sure that you have a spill kit to hand on site. This is because accidental spills can take place anywhere and at anytime. One of the main components which are present in spill kits is absorbent socks.

How absorbent socks are helpful

You can easily fix these socks at the base of machines or appliances where fluids can leak. In addition to this, these socks also help in cleaning up any mess.

When buying absorbent socks, you will find that they are available in various different types. Absorbent socks are categorised on the basis of the liquid or fluid which they can absorb.

• General absorbent socks help to absorb most liquids.

• There are also oil absorbent socks which are suitable for oil based liquids.

• The third type of absorbent socks is hazmat spill socks, which are suitable for water, oil and other dangerous fluids.

• Corn cob universal absorbent socks are specially made for oil or water based liquids.

All types of absorbent socks have their own capacity, which means that you can opt for one which suits your requirements best.

One of the best things about absorbent socks is that you can use reuse them.